Save with a membership: Unlimited STL downloads from $5/mo on Patreon
GulpDust

Adapter photos

PETG adapter from 35 mm Milwaukee port to Makita VC4210M 31.75 mm, three quarter view
Adapter 35 mm to 31.75 mm, straight on view of the two openings
Adapter sized 35 mm to 31.75 mm for 2723-20, rotated angle showing both stubs

Dimensions

GulpDust PETG adapter, 35 mm to 31.75 mm35 mmMilwaukee 2723-2031.75 mmMakita VC4210MPETG, friction fit

Fit Diagram

35mm

Tool port

adapter
31.75mm

Makita VC4210M

Milwaukee 2723-20 to Makita VC4210MX1 11 Gallon M-Class Dust Extractor

SKU: GD-MILW-272320-MAKITAVC4210MX

ToolMilwaukee 2723-20
Tool Port35mm ID
Connects ToMakita VC4210MX1 11 Gallon M-Class Dust Extractor (31.75mm)
Fit TypeFriction fit (no tools needed)
MaterialPETG (chemical resistant, workshop safe)
Print OrientationVertical
Infill20%

Build this adapter on demand

We print to order. Drop your email and we will queue this exact fit and ship it from the US in two to three business days.

Friction fit on both ends, so it seals tight and you skip the tape. Printed with full fill on contact surfaces for a snug, airtight grip.

  • Sized to your exact port
    Real specs, not guesswork
  • Made in the USA
    Printed to order
  • Ships in 2 to 3 days
    Fast and tracked
  • PETG, not brittle PLA
    Built for the shop

About This Adapter

Catch the dust right at the tool, so it ends up in the vac and not in your lungs or all over the bench. This part connects the Milwaukee 2723-20 dust port (35mm) to a Makita VC4210MX1 11 Gallon M-Class Dust Extractor hose or fitting (31.75mm ID).

It is printed in PETG, so it shrugs off heat and shop solvents and will not crack like brittle PLA. The friction fit grips the hose, so you skip the tape and clamps in most setups.

Every adapter is printed to order and made in the USA, so you get a clean fit shipped to you in 2 to 3 business days.

What You Get

  • One PETG adapter, printed to order for your exact ports
  • Friction fit on both ends, so it seats with a push
  • Airtight seal, so suction stays strong at the blade
  • Fits standard hose sizes, so it drops into your setup
  • No clamps, tape, or glue, so setup takes seconds

Tool specs

Weight: 2.95 lbs

Max RPM: 31,000

Cordless (battery)

Need a different fit?

This adapter is sized for the Milwaukee 2723-20 paired with Makita VC4210MX1 11 Gallon M-Class Dust Extractor. If you want the same tool with a different vacuum or duct size, the configurator can rebuild it in a few clicks. Your tool stays picked, you swap the output.

Open configurator →
All specs for Milwaukee 2723-20 →Browse all adapters →Dust collection guides →