WEN HB424V Belt Sander Dust Port Adapter and Vacuum Guide
Dust port
We fit it Round port, friction
Our adapter is made for the WEN HB424V port. It presses on by hand and holds, so there is nothing to clamp or tape.
Get the adapter for this WEN HB424V.
Tell us what you are connecting to and we print it to fit. Both ends are a push fit, so there is nothing to clamp or tape.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
WEN HB424V 10-Amp 4 x 24 in. Variable Speed Belt Sander
Specifications
Full port and fit detail for this tool
The WEN HB424V is a 10 amp, 4 x 24 in. variable speed belt sander that works handheld or flipped over as a benchtop sander. A 4 x 24 belt is the big gun of handheld sanding, and it makes dust to match. Hooking a shop vac to the port pulls that dust at the source, so it fills the vac instead of your shop air.
The onboard port is round and takes either the bag or a hose. A GulpDust PETG adapter fits that port on one end and your shop vac hose on the other, so the hose holds instead of falling off.
WEN HB424V Specs
| Port shape | Round |
|---|---|
| Connection type | Friction fit |
| Belt size | 4 in. x 24 in. |
| Motor | 10 amp |
WEN HB424V Dust Port: What Fits It
The onboard dust port on the HB424V takes the included dust bag or a hose. Our PETG adapter is built to fit it.
Heads up: this port is not the same as the one on WEN's 3 inch belt sanders. An adapter made for the HB321V or HB6319 will sit loose on this sander, so order by your exact model.
Most shop vac hoses are 1-7/8 in. or 2-1/2 in., and neither seals on a sander port by itself. The adapter grips this port on one end and your vac hose on the other, so you get a snug fit with no tape and no clamps.
How to Connect a Shop Vac to the WEN HB424V
First, pull the dust bag off and clear any packed dust out of the port, so it fits snug.
Press the tool end of the PETG adapter onto the port. It is a friction fit, so a firm push holds it. Press your shop vac hose onto the other end. Turn the vac on before the belt touches wood.
If you flip the sander over for benchtop use, route the hose off the back edge of your bench, so it does not crowd your hands while you feed stock.
Big Belt, Big Dust: Why the HB424V Needs a Vac
A 4 x 24 belt removes wood faster than any other handheld sander, so it also makes fine dust faster than any other handheld sander. The cloth bag traps chips and lets the fine dust through.
A shop vac on the port pulls that fine dust away before it spreads. Run the vac every time and the sander stays a workhorse instead of a dust storm.
WEN HB424V Dust Collection FAQ
What fits the dust port on the WEN HB424V?+
Our PETG adapter does. One end presses onto the sander port. The other end takes your shop vac hose.
Is the WEN HB424V adapter the same as other WEN belt sanders?+
No. The HB321V, HB6319, and 20418 share one adapter. The HB424V port is different and needs its own. Order by your exact model number.
Does the WEN HB424V work with a regular shop vac?+
Yes, with the right adapter. A standard shop vac hose is wider than the sander port. The GulpDust PETG adapter fits the port on one end and your vac hose on the other.
Do I need clamps or tape to attach the adapter?+
No. The adapter is a friction fit. You push it onto the port and it holds. The same goes for the vac hose end.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.