Bosch ROS20VSK Random Orbit Sander Dust Port Adapter and Vacuum Guide
Dust port
We fit it Round port, friction
Our adapter is made for the Bosch ROS20VSK port. It presses on by hand and holds, so there is nothing to clamp or tape.
Get the adapter for this tool. Printed and shipped from $12.99.
- Made in the USAPrinted to order
- PETGTougher than PLA
- Push onNo clamps, no tape
- Print defectWe reprint it
Bosch 5 in. Variable Speed Random Orbit Sander
Specifications
Connect your Bosch ROS20VSK to your shop vac
Pick what you are connecting to. Each one is a finished PETG adapter, sized for both ends, printed to order and made in the USA.
Standard hose & duct sizes
Popular vacuums & extractors
Not sure which size?
Full port and fit detail for this tool
The Bosch ROS20VSK is the Bosch 5 in. Variable Speed Random Orbit Sander. The dust port on the side is round. Our PETG adapter is made to fit it.
A sander makes fine dust that hangs in the air and gets into your lungs. Pulling it right at the port keeps more of it out of the air. One end of the adapter grips the sander port. The other end takes your shop vac hose. It is a friction fit. No tape. No clamps.
Bosch ROS20VSK Specs
| Port shape | Round |
|---|---|
| Port location | Side |
| Connection type | Friction fit |
Bosch ROS20VSK Dust Port: What Fits It
The dust port on the ROS20VSK is round and sits on the side of the sander. Our adapter is made to fit it.
Most shop vac hoses are 1-7/8 inch or 2-1/2 inch. Both are far too wide for a small sander port. That gap is why fine dust sprays out instead of going into the hose.
A GulpDust adapter is printed to match the sander port on one end and your vac hose on the other end. Pick your hose and we make the part to match.
How to Connect a Shop Vac to the Bosch ROS20VSK
First, clear any dust out of the port. A clean port gives the best fit.
Press the tool end of the PETG adapter onto the port. It is a friction fit, so it holds with a firm push. Then press your shop vac hose onto the other end of the adapter. Turn the vac on before you start to sand.
Bosch ROS20VSK Dust Collection FAQ
Will a GulpDust adapter fit the Bosch ROS20VSK dust port?+
Yes. The port is round and sits on the side of the sander. Our adapter is printed to fit it, and the other end matches your shop vac hose.
Does the Bosch ROS20VSK work with a regular shop vac?+
Yes, with the right adapter. A standard shop vac hose is much wider than the Bosch dust port. The GulpDust PETG adapter fits the tool port on one end and your vac hose on the other.
Do I need clamps or tape to attach the adapter?+
No. The adapter is a friction fit. You push it onto the port and it holds. The same goes for the vac hose end.
Do you sell the design file?+
No. We sell the finished part. Each one is printed to order in PETG and ships from the US.
Related Guides
Concrete Grinder With Vacuum Setup: Dust Collection Adapters for Hilti, DeWalt, Bosch, and Metabo
Surface grinding concrete is dirty work. OSHA Table 1 says you need a HEPA vacuum and a shroud. This guide covers the hand-held and floor grinder lineup, the rental hookups, and the PETG adapter that connects any brand to any shop vac.
8 min read
Bosch PROFACTOR Dust Collection and the GKT13 Track Saw
Bosch PROFACTOR tools use their own port size, not the Milwaukee, DeWalt or Makita one. Here is what you need to connect them.
4 min read
Angle Grinder Dust Shroud and Vacuum Attachment Guide: Connect Any Grinder to Any Shop Vac
Every angle grinder dust shroud uses a different port size. Every shop vac hose is a different diameter. This guide covers the shrouds for DeWalt, Milwaukee, Bosch, and Makita grinders, plus the printed PETG adapter that connects any of them to your vac.
8 min read
Bosch Power Tool Dust Collection: Ports, Hoses, and Adapters
Bosch tools use a port standard that differs from both Milwaukee and Makita. Here is what you need to connect any Bosch tool to a shop vac or dust extractor.
4 min read